Climax 757 Half Face Reusable Respiratory Masks comes with P3 Fiters

£39.00 (Incl VAT)

Half Face Reusable Respiratory Masks comes with P3 Fiters
Semi masks made of silicone. The filters are connected to the mask using a bayonet system.
Adjustable harness and neck strap.
It has a very low resistance to breathing when incorporating two filters.
Compatible with CLIMAX 757-N filters for gases, vapours or particles.
The 757-S half mask has been designed to provide maximum protection against gases, vapours, and viruses that sit on particles

Filter connection: Bayonet
Filters: 757-N
Material: silicone
Nominal Protection Factor (FP): 50
Weight: 159 gr
Standard: EN 140: 1998

Main body of the half mask: Made of blue natural silicone.
The design and the material used allow it to adjust to the face in an airtight manner, preventing air from leaking into the interior through the face/mask join. the exhaling valve.

Exhaling valves: of a valve-holder and a membrane, which makes it easier for exhaled air to escape.

962 in stock

Qty :

Add to Wishlist
Add to Wishlist
Add to compare
SKU: 757S Categories: , ,

Half Face Reusable Respiratory Masks comes with P3 Fiters
Semi masks made of silicone. The filters are connected to the mask using a bayonet system.
Adjustable harness and neck strap.
It has a very low resistance to breathing when incorporating two filters.
Compatible with CLIMAX 757-N filters for gases, vapours or particles.
The 757-S half mask has been designed to provide maximum protection against gases, vapours, and viruses that sit on particles

Filter connection: Bayonet
Filters: 757-N
Material: silicone
Nominal Protection Factor (FP): 50
Weight: 159 gr
Standard: EN 140: 1998

Main body of the half mask: Made of blue natural silicone.
The design and the material used allow it to adjust to the face in an airtight manner, preventing air from leaking into the interior through the face/mask join. the exhaling valve.

Exhaling valves: of a valve-holder and a membrane, which makes it easier for exhaled air to escape.


Description

Complies with the requirements of regulation (EU) 2016/425 and the harmonized standards of
EN 140:1998.This product is a PPE of category III in accordance with attachment I of the
regulation and is identical with that PPE which was subject to the EU Type-examination (Module
B) No. 0082/3071/079/05/19/0518 Issued by APAVE SUDEUROPE SAS, identification number
0082 and that is subject to the conformity assessment procedure according to Module C2 under
the control of the notified body APAVE SUDEUROPE SAS, identification number 0082.
Parets del Vallès, 07 de Junio 2019

Follow by Email
Facebook
Twitter

Need help or advice?

If you have a question or require further information on any of our products please contact us:
Phone: 0203 409 3230
Email: sales@at-height.co.uk

Related products